KIMCHI

sudo apt-get install nginx
wget https://github.com/kimchi-project/kimchi/releases/download/2.5.0/wok-2.5.0-0.noarch.deb
wget http://kimchi-project.github.io/gingerbase/downloads/latest/ginger-base.noarch.deb
wget https://github.com/kimchi-project/kimchi/releases/download/2.5.0/kimchi-2.5.0-0.noarch.deb
sudo dpkg -i wok-2.5.0-0.noarch.deb
sudo apt-get install -f
sudo service wokd start
sudo dpkg -i ginger-base.noarch.deb
sudo apt-get install -f
sudo service wokd restart
sudo reboot
sudo dpkg -i kimchi-2.5.0-0.noarch.deb
sudo apt-get install -f
sudo reboot

Change port at the Nginx config: sudo nano /etc/nginx/conf.d/wok.conf Look for the following line: listen 0.0.0.0:8001 ssl; and change it to: listen 0.0.0.0:443 ssl; Also locate inside of location, config: proxy_redirect http://127.0.0.1:8010/ https://$host:8001/; and change this to: proxy_redirect http://127.0.0.1:8010/ https://$host:443/; Change the port in the Wok config: sudo nano /etc/wok/wok.conf Uncomment the following line: #proxy_port = 8001 Change it to: proxy_port = 443

sudo service wokd restart
sudo service nginx restart

Now you can open the web interface on https://Server_IP


Sources:

  • http://www.ubuntuboss.com/ubuntu-server-16-04-as-a-hypervisor-using-kvm-and-kimchi-for-vm-management/>