Skip to main content

VyOS

  1. Download vyos-1.1.7-amd64.iso
  2. Boot from ISO and run #install system
  3. Copy from production /config/config.boot, /etc/openvpn/easy-rsa and /etc/bacula/bacula-fd.conf placing them on the same location
  4. Run addgroup nobody
  5. Add the following in sources.list:
    deb http://archive.debian.org/debian squeeze main
    deb http://archive.debian.org/debian squeeze-lts main
  6. Add the following in /etc/apt/apt.conf (create it if it doesn't already exist):
    Acquire::Check-Valid-Until false;
  7. Run:
    apt-get update && apt-get install bacula-fd
  8. Under 'configure' mode run:
    load
    commit
    save
  9. On Hyper-V host:
    Set-VMNetworkAdapterVlan -Trunk -AllowedVlanIdList "1-4094" -VMName "bron" -VMNetworkAdapterName "Network Adapter" -NativeVlanId 0
    Get-VMNetworkAdapterVlan

Sources:

title: VyOS - Random

category: Firewall​

Set IP on an interface:

set interfaces ethernet eth1 address 10.10.10.1/24

Create a DHCP pool:

set service dhcp-server shared-network-name DHCP_Pool_ETH1 subnet 10.10.10.0/24
edit service dhcp-server shared-network-name DHCP_Pool_ETH1 subnet 10.10.10.0/24
set start 10.10.10.24 stop 10.10.10.250
set default-router 10.10.10.1
set dns-server 10.10.10.1
set domain-name tendo.local

Create a static DHCP entry:

edit service dhcp-server shared-network-name DHCP_Pool_ETH1 subnet 10.10.10.0/24
set static‐mapping WinXP-2 ip‐address 10.10.10.100
set static‐mapping WinXP-2 mac‐address 00:0c:29:9a:70:ca

Verification commands:

show service dhcp-server
show dhcp server statistics
show dhcp server leases
show interfaces ethernet eth1

Set IP on a VLAN interface:

set interfaces ethernet eth1 vif 100 address 192.168.100.254/24

Define a static route:

set protocols static route 172.17.17.133/32 next-hop 172.20.0.19